Order Quick View
- No products in the cart.
Total:
0,00€
Inorganic Zinc Primer
Two-component product: component A is made up of zinc powder and component B of ethyl silicate and additives. It is used as a primer with a high sub-cellular anticorrosive power for sandblasted iron and cast iron products with cathodic protection. Recommended for use on surfaces and structures that could remain unused for a long time, in sea or urban environment, or for a later assembly. It also has a remarkable resistance to high temperatures: up to 400°C continuous.
APPLICATION TOOLS: 
HARDENING: Mix ratio by weight 1 : 2,2 with zinc powder (code 80022)
DRYING TIME AT 20°C: dry to touch 15-20 minutes
GLOSSINESS: matt
SPECIFIC WEIGHT OF THE MIXED PRODUCT: 2,62 kg/l
CONSUMPTION: for dry thicknesses of 75 microns 360 gr/m² is necessary
POSSIBLE RECOATING (AFTER 24-48 HOURS): chlorinated rubber, vinyl, epoxy, epoxy vinyl, silicone finishes, where polyurethane finishes are required an epoxy-based intermediate must be applied
FOR APPLICATION ON: sandblasted iron
Neutral Binder for this product...
Technical Data Sheet
Inorganic Zinc Primer
Looking for more information about this product?
Click here to view or download technical data sheet for this product in PDF format…
Related products
-
Water-Based Acrylic Primer
MORE INFOAnticorrosive primer based on modified acrylic resins. Suitable as a base coat on any type of ferrous surface, aluminium alloys an...
-
High Solids Acrylic Primer
MORE INFOPrimer based on hydroxylated acrylic resins with excellent adhesion to both iron and galvanized surfaces. The content in volatile ...
-
TITANFER – Zinc Phosphate Anti-Rust series 4000
MORE INFOFast drying anti-rust containing zinc phosphates (anticorrosive) for iron surfaces. Formulated to have a good anchoring power on m...
-
Transparent Epoxy Primer (Solvent)
MORE INFOTwo-component, solvent-based epoxy primer with excellent penetrating power for cement and concrete floors. It acts as a consolidat...